Ordering Flutes
When ordering custom fluted columns, you must specify three dimensions.
A, the over all height of the entire column face is 97″, Specify how many sides you would like. Keep in mind that you need 2 sides to make a pilaster and 4 sides to make a column. Specify whether you are ordering pilasters, partial, or full columns. B, and D are the uncut or unfluted top and bottom section. Lastly, C, the length of the flutes themselves.
To confirm, the sum of B + C + D should equal A, 97″. (we include 1 extra inch, in case of damage during shipping).
All Elite square columns with our exclusive lock mitre joint are 8″ wide.
The sides shown, can be either be that of square columns or flat pilasters.
We offer several mounting positions.
As illustrated, depending on how the flutes are cut and on what trims are uses for crowns, trims and bases, there are endless possibilities. Call for advice anytime.
Click Here for more information of Ordering Flutes
More Products
- Manufacturer of Wainscoting
Manufacturer of Wainscoting
Next time before going to your paint or wallpaper dealer, thing again. Its better to think about the concept of today?€™s house i.e. Wainscoting. In general ... - Installing Wainscoting
Installing Wainscoting
Materials:
- chair rail molding
- narrow trim
- 220-grit sandpaper
- tack cloth or rags
- latex primer
- miter box
- portable bench
- long level
- stud finder
- f... - Metal Ceiling Medallion
Metal Ceiling Medallion
Materials:
- ceiling medallion
- black satin latex for base coat
- texture base coat (antique bronze, copper, gold)
- rubbing alcohol in spritzer bottle
- sea sponge
... - Custom Paneled Wainscoting: 8 ft KIT 36 inch high
Elite Mouldings Inc.:Wainscoting : Custom Paneled: 8 ft KIT, 36" high
Complete 8 ft KIT, 36" high, best with 8ft ceilings, consisting of: one 8' length of upper rail; one 8' length of base rail; on... - Cutting Tips
Cutting Tips
All machinery used to machine wood will become more efficient when used properly. When it comes to making clean, glass like cuts, a sharp chopsaw blade is in order. As seen in the illu... - Another Way to Installing Wainscoting
Another Way to Installing Wainscoting
Materials:
- 1-x 4-inch pine lumber
- miter saw
- hammer
- nail set
- 6d-finish nails
- level
- pencil
- tape measure
- stud finder
- spackle
- c... - Manufacturer of Wainscoting in Canada
Manufacturer of Wainscoting in Canada
Next time before going to your paint or wallpaper dealer, thing again. Its better to think about the concept of today?€™s house i.e. Wainscoting. I... - Buy Cornices from Elite Mouldings
Buy Cornices from Elite Mouldings
Next time before going to your paint or wallpaper dealer, thing again. Its better to think about the concept of today?€™s house i.e. Cornices. In gener... - Stationary Toppers
Materials:
- Tension rods
- Fabric
- Lining
- Measuring tape
- Tassels
- Fusible interfacing
- Iron
- Hot glue gun
- Decorative Trim
- 1" x 6" Board
- Miter Saw
- Staple Gun
- 1/4" Lua... - Free Design Service
Free Design Service
1. Measure and make a sketch.
2. Fax us a sketch and measurements.
Please verify that all the requested information is included Fax to: 905-760-1519 Be sure to tell us:
W...